ADC / DAC conversion modules analog-to-digital / digital-to-analog conversion

Description:

 PCF8591 module AD / DA conversion modules analog-to-digital / digital-to-analog conversion


  • Single-Supply Operation
  • PCF8591 operating voltage range of 2.5V to 6V
  • Low standby current
  • through the I2C bus serial input / output
  • PCF8591 by 3 hardware address pins addressing
  • Sampling rate PCF8591 I2C bus rate decided
  • 4 analog inputs programmable as single-ended or differential inputs
  • Automatic incremental channel selection
  • PCF8591 analog voltage range from VSS to VDD
  • PCF8591 built-in track and hold circuit
  • 8-bit successive approximation A / D converter
  • through an analog output DAC gain


The baby description:


1. A module chip using PCF8951
2. module supports external voltage input capture (input voltage range 0-5v)
3. Three modules integrated photoresistor acquisition environment through the AD intensity accurate numerical
4. modules integrated thermistor, can capture the precise value of the ambient temperature through the AD
5. The five-module integrated 1 channel 0-5V voltage input acquisition (blue potentiometer to adjust the input voltage)
6. modules with power indicator light (on the module after power indicator lights)
7. modules with the DA output indicator light board DA output indicator module DA output interface voltage reaches a certain value, the voltage the greater the light brightness is more obvious;
8. module PCB size: 3.6cm * 2.3cm
9. standard double-sided, plate thickness 1.6mm, the layout is nice, surrounded by the through-hole, aperture: 3mm, convenient fixed


The module interface:


The module's left and right, respectively, the external expansion of 2-way pin interface, respectively, as follows:
Output interface of the left the AOUT chip DA
The AINO chip analog input interface.
AIN1 chip analog input interface
AIN2 chip analog input interface
AIN3 chip analog input interface
The right side of the SCL IIC clock interface to access the microcontroller IO port
The SDA IIC digital interface connected microcontroller IO port
GND module to an external
VCC power supply interface external 3.3v-5v

Module red jumper instructions for use
Module three red short circuit cap, respectively, the role are as follows:
P4 connected to the P4 jumper, select thermistor access circuit
P5 connected to P5 jumper to select the photoresistor access circuit
P6 connected to the P6 jumper, to select 0-5V adjustable voltage access circuit


 


Features:

 Single power supply

 Operating supply voltage 2.5 V to 6.0 V

 Low standby current

 Serial input and output via I2C-bus

 I 2C address selection by 3 hardware address pins

 Max sampling rate given by I2C-bus speed

 4 analog inputs configurable as single ended or differential inputs

 Auto-incremented channel selection

 Analog voltage range from VSS to VDD

 On-chip track and hold circuit

 8-bit successive approximation A/D conversion

 Multiplying DAC with one analog output.

Kit include:

1 x  PCF8591 module

Documents:

Datasheet

10 JD
Quantity
5 in stock
10 JD 1+ units
9.5 JD 10+ units
9 JD 25+ units
8.5 JD 100+ units



Related Products

subscribe to our weekly newsletter

loading