Description:

SimonK 12A & 30A

Emax SimonK Series Multirotor 12A Brushless ESC (Electronic Speed Controller) with 2A 5V UBEC. This 12A Brushless ESC Electronic Governor Supports 2-3S Small Axis. In the Simonk program based and optimized to achieve the perfect driving effect With low voltage protection, over-temperature protection.

Other functions on the Power On Self Test Up to speed: 210000 RPM (2 poles), 70,000 RPM (6 poles); 35000 (12 poles) MCU and BEC different regulator, independent of each other and improve the anti-jamming capability.

Multiple parameters can be obtained by the governor (programming card) or remote settings. Throttle range can be configured to be compatible with different receivers, there is a very good low-speed performance

Emax SimonK Series Multirotor 30A Brushless ESC (Original) is a brushless dc motor speed controller. The low output resistance greatly enhances power stability, and this will improve the great battery life. Emax SimonK Series Multirotor 30A Brushless ESC is programmed to start the brushless dc motor. This ESC has a greater current handling capacity which is 30A continuous and the peak current is 40A for the last 10 seconds only.

Features:

• Based on SimonK firmware, further optimized to the perfect drive performance.
• Low-voltage protection, over-heat protection, and throttle signal loss protection.
• Separate power supply for MCU and BEC, enhancing the ESC’s ability to eliminate magnetic interference.
• Parameters of the ESC can be set via a program card or transmitter.
• Throttle range can be set to be compatible with different receivers.
• Equipped with built-in linear BEC or switch BEC.
• Max speed: 210,000 rpm for 2-pole, 70,000 rpm for 6-pole, 35,000 rpm for 12-pole.