1、Make sure your phone's operating system is Android 4.4 or iOS 7.0
2、Use according to the instructions, remove the insulation sheet before use
3、Prevent the probe from touching the non-soil material of the stone when inserting into the soil
How to use:
1. Open the back cover of the Plant Monitor, remove the insulator
under the battery, and close the back cover when using for the first
2. Insert the plant monitor into more than 1/3 of the soil
3. Turn on the phone's Bluetooth
4. Download the app "Flower Care", open the app; Mi login or create a
5. Click the "+" in the upper right corner
6. Turn on the GPS and make sure the app gets the exact location
[GPS and network based]
7. Then APP will scan the plant monitor
8. When the connection is successful, the light detection will flash twice
9. When inspecting hydroponic crops, do not immerse the EC probe in
water for a few seconds.
10. The equipment must be kept dry and not exposed to rain. It is best
to put it inside.
Accurate test results:
The measurable light intensity reaches 10000 Lux. The measurement error is 100Lux. Temperature measurement error is within 0.5 degrees Celsius
Dimensions: 120.5mm x 24.5mm x 12.5mm.
Wireless connection: Bluetooth 4.1.
Working voltage: 3V.
Battery: CR2032 button battery (with 365 days of autonomy).
CMIIT code: 2016DP0940.
Meet the standard: Q / CYHHC0001-2015.
1 x plant monitor.