450W H-Bridge DC Brushed PWM Motor Driver Module DC 12V/24V/36V
Driver module features:(1) full-bridge driver chip + low-resistance 110A NMOS drive tube to achieve motor brake and reversing.(2) chip operating frequency up to 1MHZ, solve VNH3SP30 MC33886 motor noise and heat problems Japan(3) 2 way PWM inputs in 0-100% duty cycle,(4) applies to lithium battery-powered directly drive(5) built-in logic circuit isolation buffer. Support PLC, directly control of va...
Driver module features:
(1) full-bridge driver chip + low-resistance 110A NMOS drive tube to achieve motor brake and reversing.
(2) chip operating frequency up to 1MHZ, solve VNH3SP30 MC33886 motor noise and heat problems Japan
(3) 2 way PWM inputs in 0-100% duty cycle,
(4) applies to lithium battery-powered directly drive
(5) built-in logic circuit isolation buffer. Support PLC, directly control of various types of 3V or 5V MCU IO ,By analog voltage input to control the motor brake and reversing.
(7) chip built-in hardware dead-time control,
(8) chip operating frequency up to 1MHZ, Suitable for Empty harbor motor driving
EN: enable terminal
PWML1: forward rotation Control
PWML2: inversion control
GND: power grounding cable
Outputs:
VIN +: driver board power supply input
Positive electrode
GND: driver board power supply input
Negative electrode
M +: connect motor wire
M-: connect motor wire
Control mode instructions:
Electricity Level Control:
EN = 0 PWML1 = 0 PWML2 = 1 motor forward running
EN = 0 PWML1 = 1 PWML2 = 0 motor reverse running
EN = 0 PWML1 = 1 PWML2 = 1 motor brake
EN = 1 PWML1 = 1 PWML2 = 1 Motor freedom
PWM control mode:
EN = 0 PWML1 = duty cycle Adjustable PWM signal PWML2 = 1 motor forward running (changing the duty cycle can speed regulation)
EN = 0 PWML1 = 1 PWML2 = duty cycle Adjustable PWM signa motor reverse running (changing the duty cycle can speed regulation)
EN = 0 PWML1 = 1 PWML2 = 1 motor brake
EN = 1 PWML1 = 1 PWML2 = 1 Motor freedom