SPDT Slide switch SS12D00G2
The SS12D00G2 SPDT Slide Switch is a compact, single-pole double-throw (SPDT) slide switch ideal for power on/off control and signal routing in electronics projects. Rated at 30V / 200mA, it features standard 0.1" (2.54mm) pin spacing, making it breadboard-friendly and easy to integrate into Arduino, Raspberry Pi, and DIY circuits. Perfect for use as a power switch, mode selector, or general-purpose control switch in prototypes and finished projects.
مفتاح SPDT منزلق موديل SS12D00G2 هو مفتاح منزلق مدمج من نوع قطب واحد ورمي مزدوج (SPDT)، مثالي للتحكم بـ تشغيل/إيقاف الطاقة وتوجيه الإشارات في المشاريع الإلكترونية. يتحمّل 30 فولت / 200 مللي أمبير، ويتميّز بمسافة قياسية بين الأطراف 0.1 إنش (2.54 ملم)، مما يجعله متوافقاً مع لوح التجارب (Breadboard) وسهل التركيب في مشاريع Arduino وRaspberry Pi. ممتاز كـ مفتاح طاقة، أو مفتاح اختيار، أو مفتاح تحكم عام.
The SS12D00G2 is a simple yet reliable SPDT (Single-Pole Double-Throw) slide switch widely used in electronics prototyping and finished products. Its compact size, clean mechanical action, and standard 0.1" (2.54mm) pin spacing make it an extremely versatile component for any project that needs a manual on/off control or two-position selector.
The breadboard-compatible pin layout allows the switch to be inserted directly into a standard breadboard or perfboard without any adapters, making it perfect for rapid prototyping with Arduino, Raspberry Pi, ESP32, and other microcontrollers. The same pin spacing also lines up perfectly with through-hole PCB designs, so a prototype using this switch can move directly to a finished PCB without redesign.
Rated at 30V and 200mA, the SS12D00G2 is well suited for low-voltage, low-current control applications — such as switching between two signal paths, enabling/disabling a microcontroller line, selecting a mode, or acting as a power on/off switch for battery-powered projects running on coin cells, AA cells, or small LiPo packs.
In an SPDT configuration, the switch has three terminals: a common (COM) pin in the middle, and two outputs (one active in each slide position). When the slider is in one position, COM connects to one output; when it slides to the other position, COM connects to the other output. This makes it useful as a 2-way selector switch as well as a simple on/off switch (by using only one of the two output pins).
Specifications
- Switch Type: SPDT (Single-Pole Double-Throw) Slide Switch
- Part Number: SS12D00G2
- Voltage Rating: 30V
- Current Rating: 200 mA
- Number of Positions: 2
- Number of Pins: 3 (Common + 2 Outputs)
- Pin Spacing: 0.1" (2.54 mm) — breadboard compatible
- Mounting Type: Through-hole
- Actuation: Manual slide
Pinout
- Pin 1: Output 1 (active in position 1)
- Pin 2 (Center): Common (COM)
- Pin 3: Output 2 (active in position 2)
Applications
- Power on/off switch for battery-powered projects
- Mode selection between two operating states
- Signal routing between two paths
- Arduino, Raspberry Pi, and ESP32 prototypes
- DIY electronics and breadboard circuits
- Small handheld devices and gadgets
- LED control and lighting projects
- Audio circuits — channel or input switching
- Toy and hobby electronics
- Educational STEM kits and learning boards
- Custom PCB designs with through-hole assembly
- Low-current control in sensors and remote devices