Description:

Driver module features:

(1) full-bridge driver chip + low-resistance 110A NMOS drive tube to achieve motor brake and reversing.

(2) chip operating frequency up to 1MHZ, solve VNH3SP30 MC33886 motor noise and heat problems Japan

(3) 2 way PWM inputs in 0-100% duty cycle,

(4) applies to lithium battery-powered directly drive

(5) built-in logic circuit isolation buffer. Support PLC, directly control of various types of 3V or 5V MCU IO ,By analog voltage input to control the motor brake and reversing.

(7) chip built-in hardware dead-time control,

(8) chip operating frequency up to 1MHZ, Suitable for Empty harbor motor driving

EN: enable terminal

PWML1: forward rotation Control

PWML2: inversion control

GND: power grounding cable

Outputs:

VIN +: driver board power supply input

Positive electrode

GND: driver board power supply input

Negative electrode

M +: connect motor wire

M-: connect motor wire

Control mode instructions:

Electricity Level Control:

EN = 0 PWML1 = 0 PWML2 = 1 motor forward running

EN = 0 PWML1 = 1 PWML2 = 0 motor reverse running

EN = 0 PWML1 = 1 PWML2 = 1 motor brake

EN = 1 PWML1 = 1 PWML2 = 1 Motor freedom

PWM control mode:

EN = 0 PWML1 = duty cycle Adjustable PWM signal PWML2 = 1 motor forward running (changing the duty cycle can speed regulation)

EN = 0 PWML1 = 1 PWML2 = duty cycle Adjustable PWM signa motor reverse running (changing the duty cycle can speed regulation)

EN = 0 PWML1 = 1 PWML2 = 1 motor brake

EN = 1 PWML1 = 1 PWML2 = 1 Motor freedom

Features:

modular nature:H-bridge DC motor driver moduleSuitable for 11-36V DC Motor

Scope:High-power DC motor drive

Driving voltage: DC 11-36V

Output Current: 15AMaximum continuous load current 20A

Output Power: max 450W (less than 360W do not need heat sink)

Working temperature: 40 to + 85

Full load temperature: 45

Dimensions: 6.6cm × 3.8cm x2.8c

Kit include:

1 x 450W H-Bridge DC Brushed PWM Motor Driver Module DC 12V/24V/36V