Arduino Nano ESP32
Description:
Introducing the Nano ESP32, a powerful addition to the Arduino ecosystem that brings the popular ESP32-S3 to the world of Arduino and MicroPython programming. Whether you're a beginner stepping into the world of IoT or MicroPython, or an advanced user looking to incorporate it into your next product, the Nano ESP32 is the perfect choice. It covers all your needs to kick-start your IoT or MicroPython project with ease.
Nano ESP32 is a 3.3 V development board based on the NORA-W106-10B from u-blox®, a module that includes a ESP32-S3 system on a chip (SoC). This module has support for Wi-Fi® and Bluetooth® Low Energy (LE), with amplified communication through a built-in antenna. The CPU (32-bit Xtensa® LX7) supports clock frequencies at up to 240 MHz.
Features:
- Microcontroller: u-blox® NORA-W106 (ESP32-S3)
- USB Connector: USB-C
Pins:
- Built-in LED Pin: 13 (RGB)
- Digital I/O Pins: 14
- Analog inupt pins: 8
- PWM pins: 5
- External interupts: All digital pins
- Connectivity: Wi-Fi®, Bluetooth®
Communication:
- UART: 2x
- I2C: 1x, A4 (SDA), A5 (SCL)
- SPI: D11 (COPI), D12 (CIPO), D13 (SCK).
- Use any GPIO for Chip Select (CS)
- I/O Voltage: 3.3V
- Input Voltage (nominal): 6-21V
- Source Current per I/O Pin: 40mA
- Sink Current per I/O Pin: 20mA
- Clock Speed (Processor): up to 240MHz
- ROM: 384kB
- SRAM: 512kB
- External Flash: 128Mbit (16MB)
- Width: 18mm
- Length: 45mm
Kit include:
1 x Arduino Nano ESP32
Documents:
Related Products
subscribe to our weekly newsletter
We are an online electronics store based in Jordan-Amman. The products we sell ranges from electronic products to modules and much more.
- AMMAN, Jordan. University Street, Khalifa Building 3rd floor
- Mobile: +962 7900 621 96, +962 65344772, +9627 8877 5522
- Phone: +962 6 5344772
- Fax: +96265344778
- Email: info@mikroelectron.com
2024 © Mikroelectron. ALL Rights Reserved. | Distributor Area
Made With By Tashfier.
