Description:

GPS Antenna Module UART TTL For CC3D F3 RC Drone Airplane

Description 

Dimension :　18mm*18mm*6mm

Weight : 4.9g

Connector : 1.00mm spacing between the 4pins patch seat

 

Specification

Electrical Characteristics

Chipset :M8030-KT

Receiving Format :　GPS,GLONASS,Galileo,BeiDou,QZSS and SBAS

Frequency : GPS L1,GLONASS L1,BeiDou B1,SBAS L1,Galileo E1

Channels : 72 Searching Channel

 

Sensitivity

Tracking : -167dBm

Reacquisition : -160dBm

Cold start : -148dBm

Hot start : -156dBm

 

Accuracy

Position Horizontal : 2.0 m CEP 2D RMS SBAS Enable (Typical Open Sky)

Velocity : 0.1m/sec 95% (SA off)

Timing : 1us synchronized to GPS time

 

Acquisition Time

Cold Start : 26s

Warm start : 25s

Hot start : 1s

 

Data and Update Rate

Support Rate : 4800bps to 921600bps,Default 9600bps

Data Level : TTL or RS-232,Default TTL level

Data Protocol : NMEA-0183 or UBX, Default NMEA-0183

Single GNSS : 1Hz-18Hz

Concurrent GNSS : 1Hz-10Hz,Default 1Hz

 

Operational Limits

Altitude : 50,000m Max

Velocity : 515m/s Max

Acceleration : Less than 4g

 

Power consumption

VCC : DC Voltage 3.0V-5.5V,Typical: 5.0V

Current : Capture 50mA/5.0V

Operating temp :　-40 °C ~ +85°C

Storage Temp : -40°C ~ +105°C

  

Indicator :

TX LED:blue.The data output, TX LED flashing

PPS LED:red.PPS LED not bright when GPS not fixed,flashing when fixed

 

Wiring:

GND,TX output,RX input,VCC(3.0v-5.5v)