HC-05 6pin Bluetooth Module with Button (Original Chip)


The Bluetooth Module Breakout is the latest Bluetooth wireless serial cable! This version of the popular Bluetooth uses the HC-05/HC-06 module. These modems work as a serial (RX/TX) pipe. Any serial stream from 9600 to 115200bps can be passed seamlessly from your computer to your target.

The remote unit can be powered from 3.3V up to 6V for easy battery attachment. All signal pins on the remote unit are 3V-6V tolerant. No level shifting is required. Do not attach this device directly to a serial port. You will need an RS232 to TTL converter circuit or Arduio XBee USB Adapter if you need to attach this to a computer. You can either solder a 6-pin header or individual wires.

Unit comes without a connector. Please see related male and female pins below.

And nowwe provide HC-05/06HC-05 could be setting to Master or Slave by user. HC-06 just be Master or Slavethat could be customized. This module default is HC-06 with Slave mode.

Note: Be paired must Master devices and Slave devices each other.Master and Master devicesSlave and Slave devices can't paired each other. The HC-06 (just suppy slave mode and more easy) Slave mode could paired with PDAPC etc.


Bluetooth protocol:  Bluetooth Specification v2.0+EDR

Frequency:  2.4GHz ISM band

Modulation:  GFSK(Gaussian Frequency Shift Keying)

Emission power:  ≤4dBmClass 2

Sensitivity:  ≤-84dBm at 0.1% BER

Speed: Asynchronous:  2.1Mbps(Max) / 160 kbps Synchronous: 1Mbps/1Mbps

Security:  Authentication and encryption

Profiles:  Bluetooth serial port

Power supply: +3.3VDC 50mA

Working temperature: -20 ~ +75 Centigrade

Dimensions: 15.2x35.7x5.6mm


9.5 JD
10 JD
In stock

Related Products

subscribe to our weekly newsletter