2S 5A 7.4V 8.4V 18650 Lithium Lipo Cell Battery Charger Board Li-ion Battery Charging PCB BMS Protection Module
Description:
Model: HX-2S-01
Charging Voltage: 8.4V-9V
Overcharge Voltage Range: 4.25V-4.35V ± 0.05V
Overpressure Voltage Range: 2.3V-3.0V ± 0.05V
Upper Limit Operating Current: 5A
Upper Limit Instantaneous Current: 7A
Quiescent Current: <10uA
Internal Resistance:<100mΩ
Effective Life:> 30,000 hours
Operating Temperature: -40- +50℃
Storage Conditions: -40- +80℃
Size: 38 * 8 *2.5mm
Short Circuit Protection: protection, delay self-recovery
Applicable Scope:
The power range is suitable for the following products: massager battery pack, LED light standby power supply, 12V electronic products, solar street light battery pack, monitor backup power supply, and other products.
Note: 3A current discharge products above, the battery discharge rate to 3C or more.
Note:
The battery will heat when using it, it means the battery does not apply , please don’t keep using becuase the battery will be damaged soon.
The protection board can not be used for lithium iron phosphate battery, hernia lamp, hand drill battery pack, electric fish machine battery pack, electric bicycle battery pack, children’s car battery, 775 (4A)motor, 1W fish eye LED light!
Connector:
B+ : Connected to the battery positive
B- : Connected battery negative
MB : Connect the battery 1 to the connection point before battery 2
P+ : Charge / discharge side positive (shared charge / discharge side)
P- : Connection / discharge terminal negative (charge / discharge side shared)
Note:
Related Products
subscribe to our weekly newsletter
We are an online electronics store based in Jordan-Amman. The products we sell ranges from electronic products to modules and much more.
- AMMAN, Jordan. University Street, Khalifa Building 3rd floor
- Mobile: +962 7900 621 96, +962 65344772, +9627 8877 5522
- Phone: +962 6 5344772
- Fax: +96265344778
- Email: info@mikroelectron.com
2024 © Mikroelectron. ALL Rights Reserved. | Distributor Area
Made With By Tashfier.
