ESP32 dev Kit v1 WIFI Bluetooth Networking Development Board

Description:

ESP-WROOM-32 WIFI Bluetooth Networking Smart Component Development Board

ESP32 is highly-integrated with in-built antenna switches, RF balun, power amplifier, low-noise receive amplifier, filters, and power management modules. ESP32 adds priceless functionality and versatility to your applications with minimal Printed Circuit Board (PCB) area requirements.

ESP32 can perform as a complete standalone system or as a slave device to a host MCU, reducing communication stack overhead on the main application processor. ESP32 can interface with other systems to provide Wi-Fi and Bluetooth functionality through the SPI / SDIO or I2C / UART interfaces.

Engineered for mobile devices, wearable electronics and IoT applications, ESP32 achieves ultra-low power consumption with a combination of several types of proprietary software. The state-of-the-art power saving features include fine resolution clock gating, power modes, and dynamic power scaling.

ESP32 is capable of functioning reliably in industrial environments with an operating temperature ranging from -40°C to +125°C. Powered by advanced calibration circuitries, ESP32 can dynamically remove external circuit imperfections or adapt to changes in external conditions.

شرح :

Features:

240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS

Integrated 520 KB SRAM

Integrated 802.11 b/g/n HT40 Wi-Fi transceiver, baseband, stack and LwIP

Integrated dual mode Bluetooth (classic and BLE)

16 MB flash, memory-mapped to the CPU code space

2.3V to 3.6V operating voltage

-40°C to +125°C operating temperature

On-board PCB antenna / IPEX connector for external antenna

Ultra-low noise analog amplifier

Hall sensor

10x capacitive touch interfaces

3 x UARTs, including hardware flow control

3 x SPI

2 x I2S

18 x ADC input channels

2 x DAC

2 x I2C

PWM/timer input/output available on every GPIO pin

OpenOCD debug interface with 32 kB TRAX buffer

SDIO master/slave 50 MHz

Supports external SPI flash up to 16 MB

SD-card interface support

WEP, WPA/WPA2 PSK/Enterprise

Hardware accelerated encryption: AES/SHA2/Elliptical Curve Cryptography/RSA-4096

Supports sniffer, Station, SoftAP and Wi-Fi direct mode

Max data rate of 150 Mbps@11n HT40, 72 Mbps@11n HT20, 54 Mbps@11g, and 11 Mbps@11b

Maximum transmit power of 19.5 dBm@11b, 16.5 dBm@11g, 15.5 dBm@11n

Minimum receiver sensitivity of -97 dBm

135 Mbps UDP sustained throughput

5 μA power consumption in Deep-sleep

Kit include:

1 x ESP32

Documents:

Datasheet

driver cp2102

Mikroelectron Code:

7.9 JD
10 JD

	Quantity
Out of stock

Add to Wishlist

Categories:Wireless Modules,Micro-Controllers,All Products,