Description:

This is the FT1806-750KV motor out of our Brushless Mega Spark Gearmotors.  Use it as a replacement for battle-damage, or in your own creation.

We have specially designed these to have no E-clip which creates a weak point in the shaft.

Motor Specifications:

- FT1806 Custom-wound High Performance Brushless Outrunner

- KV: 750KV

- Rated Voltage: 20V (happy on 2-4S lipoly)

- Rated Current: 10A.

- Motor Resistance: 0.15ohm

- Max Current @12V: 10A

- Stall Torque: Notes about Brushless Motor Torque

- No-Load Current (with Mega Spark gearbox): 1.1A

- Recommended ESC: BL20A-R Reversing Brushless ESC

- Shaft Diameter: 2mm (0.078in)

- Shaft Length: 9.6mm (0.38in)

- Weight: 25.9g (0.91oz)

- Diameter: 23.1mm (0.91in) (slightly smaller than a 24mm gearbox, so it won't rub on a sidewall if flush mounted)

- Length (back to face): 18.5mm (0.73in)

- Motor Wires: 10cm long 26AWG with 3.5mm bullet connectors

- If you require a new pinion gear to match the Mega Spark planetary gearbox, they are here: (11T Pinion) (One pinion comes with the gearbox if you are buying that already.)

Max Power Point:

- Voltage (12V nominal): 11.92V

- Current: 10.3A

- Efficiency: 58.68%

- Torque: 0.0337N.m

- Power: 72W

- Speed: 6848rpm

Mounting Holes:

- Two M2-0.40 holes spaced 16mm (0.63in), two M2-0.40 spaced 12mm (0.47in), 90degrees offset.

- The rotating portion of the motor has four M2-0.40 screw holes spaced evenly on a 9mm circle.

Wiring: Connect the three ESC wires any way you like. If the motor is spinning backwards, swap any two wires.

Kit include:

1 x FingerTech FT1806 750KV Brushless Motor