Micro wind turbines generator small DIY DC motor
Description:
DC 0.1V - 18V Micro wind turbines generator small DC motor blades w/ holder DIY project kit
Output voltage : DC 0.1v - 18v
Output current : 0.01 - 0.3A
Rated speed : 200 - 6000 rev/min
Total Size : about 200 x 190 x 130mm/7.87 x 7.48 x 5.12 inch
Motor diameter: 24.5mm/0.96 inch
Motor height: 34.2mm/1.35 inch
Motor shaft diameter: 2mm/0.079 inch
Motor shaft length: 13.5mm/0.53 inch
Blade diameter: 60mm/2.36 inch
Blade aperture: 1.95mm/0.077 inch
Number of blades: 3
Output current : 0.01 - 0.3A
Rated speed : 200 - 6000 rev/min
Total Size : about 200 x 190 x 130mm/7.87 x 7.48 x 5.12 inch
Motor diameter: 24.5mm/0.96 inch
Motor height: 34.2mm/1.35 inch
Motor shaft diameter: 2mm/0.079 inch
Motor shaft length: 13.5mm/0.53 inch
Blade diameter: 60mm/2.36 inch
Blade aperture: 1.95mm/0.077 inch
Number of blades: 3
Kit include:
1 x motor
1 x LED
1 x blade
1 x Holder (not assembled)
1 x LED
1 x blade
1 x Holder (not assembled)
Related Products
-
Wind Speed Sensor TTL
100 JD -
-
-
-
subscribe to our weekly newsletter
We are an online electronics store based in Jordan-Amman. The products we sell ranges from electronic products to modules and much more.
- AMMAN, Jordan. University Street, Khalifa Building 3rd floor
- Mobile: +962 7900 621 96, +962 65344772, +9627 8877 5522
- Phone: +962 6 5344772
- Fax: +96265344778
- Email: info@mikroelectron.com
2024 © Mikroelectron. ALL Rights Reserved. | Distributor Area
Made With By Tashfier.
