Description:
LCD Size: 1.28
Resolution: 240x240
Driver chip: GC9A01
Interface mode: SPI
Color: full color RGB
Driving voltage: 3-5V
Perspective: IPS full perspective
Operating temperature: -20-70℃
Storage Temp: -30℃~+80℃
Size: 45.5*38*23mm
Pin Definition
FPC Connector is used for the module electronics interface.
NO. |
Symbol |
Description |
1 |
VCC |
Power |
2 |
GND |
Power Ground |
3 |
SCL |
This pin is used to be serial interface clock |
4 |
SDA |
SPI interface input/out put pin. the data is latched on
the rising edge of the SCL signal. |
5 |
DC |
Display data/command selection pin in 4-line serial
interface. |
6 |
CS |
Chip selection pin: Low enable, high disable. |
7 |
RST |
This signal will reset the device and it must be applied
to properly initialize the chip, Signal is active low. |
Kit include:
1 x TFT Display 1.28 Inch Round RGB LCD Module