IOT Tracking board with ATMEGA 32u4 A9G Module GPRS GSM GPS Sensor

Description:

The 32u4 with A9G GPRS/ GSM/ GPS Board is based on Mega32u4 and A9 GPRS/ GSM/ GPS module. It can be used to make a call, send text message and get GPS positioning. Also it has one analog interface, one IIC interface and two digital interfaces, which you can connect to other expansion modules. It is very easy for you to make a GPS tracker by using this board, and its convenient to use AT firmware and use several AT commands that can be configures successful.

Specifications

Size: 3.5x5cm
Working voltage: 3.3-5v
Operating temperature: -30 ℃ to + 80 ℃
Sensitivity:
Size of A9G: 19.2 x 18.8 x 8.3mm

Quad-band: 850/ 900/ 1800/ 1900MHz
GPRS multi-slot: 12.1 to 12 can be configured
GPRS mobile station: Class B
Current consumption: 1.3mA @ DRX = 5; 1.2mA @ DRX = 9
AT command control: Standard GSM07.07, 07.05 AT commands and Ai-Thinker extended commands
GPRS Class 10: Up 85.6 kbps (upstream) & 42.8Kbps (downlink)
Dynamic Conditions Altitude <18,000 meters (60,000 feet)
Speed
Coding scheme: CS 1, 2, 3, 4
Support CSD: Up 14.4 kbps
Stack: PPP / TCP / UDP / HTTP / FTP / SMTP / MUX

Note

Make sure your SIM card is locked.
This product is supplied as is, without an insulated housing. In high humidity weather, pay special attention to ESD precautions.
It just supports baud rate: 115200 bps

 

35 JD
Quantity
0 in stock
35 JD 1+ units
33.25 JD 10+ units
31.5 JD 25+ units
29.75 JD 100+ units



Related Products

subscribe to our weekly newsletter

loading